The Huion Kamvas 13(Gen 3) can be connected to an Android phone or tablet via a full-featured USB-C to USB-C cable. (Note: A power cable is also needed for power supply).
To display in full screen, you need to turn on Huawei phones' Desktop Mode and Samsung phones' Dex Mode. Moreover, mainstream drawing apps such as Sketchbook, IbisPaint, MediBang, etc. are supported.
Connect via the Full-featured USB-C to USB-C Cable
If your computer/laptop/phone has a USB-C port that supports DP mode, you can use the USB-C to USB-C cable connection.
USB-C to USB-C cable
IMPORTANT: Please make sure that the phones, and tablets' USB-C ports support at least the USB 3.1 GEN1 data transfer protocol and DP1.2.
Connect via the USB-C to USB-C Cable
Connection Steps:
- Connect the full-featured USB-C to USB-C cable to the pen display's port ① and the Android device.
- Then, connect the power cable to the other port on the pen display ② and the power adapter for the power supply.
Please make sure the USB-C port of your the phones, and tablets at least supports USB3.1 GEN1 data transfer protocol and DP1.2.
USB-C to USB-C cable is not included in the package and requires extra cost. Please purchase the cable through official channels as it is customized and cables from unknown sources may not be usable with the device.
For more information about phone connections, please refer to this article.
For any further questions, please feel free to submit a ticket to us.