There are 2 methods to connect Kamvas 13 (Gen 3) to your computer/Android device:
1. Connect with a 3-in-1 cable.
You can use the included 3-in-1 cable for connection. When using the 3-in-1 cable, it can only be connected to a computer or laptop.
Connection Steps:
a. Connect the L-shaped USB-C connector of the 3-in-1 cable to the upper USB-C port of the Kamvas 13 (Gen 3).
b. Connect the HDMI and the USB-A cables to your PC's USB-C ports.
c. When the power supply is insufficient, the screen of Kamvas 13 (Gen 3) may black out or flicker, displaying messages such as "no signal". In this case, you can connect the power cable of the 3-in-1 cable to your PC for additional power.
*Note:
1. The power adaptor is not included in the package. The power adaptor (USB-A) of your Android phone is also compatible.
2. If you have a dedicated graphics card on your computer/Android devices, please make sure to plug the HDMI end of the 3-in-1 cable to the HDMI port on the dedicated graphics card, instead of that one on the PC's motherboard.
2. Connect with a full-featured USB-C cable.
Make sure the USB-C port of your computer/Android device and the USB-C cable meet USB 3.1 Gen 1 & DP1.2.
Connection Step:
a. Use the full-featured USB-C to USB-C cable to connect the lower USB-C port of Kamvas 13 (Gen 3) and your computer/Android device.
b. When the power supply is insufficient, the screen of Kamvas 13 (Gen 3) may black out or flicker, displaying messages such as "no signal". In this case, you can connect a charging cable or the included 3-in-1 cable (only the power end) through another USB-C port of the Kamvas 13 (Gen 3) for additional power.
