How do I connect the Huion Kamvas Pro 19 to my computer?

Wondering how to connect the Huion Kamvas Pro 19 to your computer? You can find the solution here.

Two USB-C Ports Facilitate Connections

The Huion Kamvas Pro 19 is equipped with two USB-C ports that can connect according to your needs.

2x Full-functioned Type-C Ports: Support reverse insertion. Connect monitors, video equipment, or other devices. Provide reverse charging up to 40W for the connected computer/phone/tablet.
3.5mm Headphone Jack: To connect a 3.5mm connector.

Please make sure you plug the cables into their respective ports. Otherwise, the device may fail to operate.

Huion Kamvas Pro 19 Ports

Connect via the 3-in-2 Cable (HDMI Mode)

If your computer does not have a USB-C port, you can use the included 3-in-2 cable for connection.

Huion Kamvas Pro 19 3-in-2 cable

Connection Steps:

Connect the two USB-C cables to the pen display's port ①
Connect the black USB-A cable and HDMI cable to their respective ports on the computer
Then, connect the Power Adapter to the power cable and plug the power cable into a wall outlet to start your work.

NOTE: If your computer has a dedicated graphics card, please make sure to plug the HDMI end of the 3-in-2 cable into the HDMI port on the dedicated graphics card instead of the one on the PC's motherboard. Computers running Windows, macOS, and Linux (Ubuntu) are supported.

Connect via the Full-featured USB-C to USB-C Cable (DP Mode)

If your computer/laptop/phone has a USB-C port that supports DP mode, you can use the USB-C to USB-C cable connection.

USB-C to USB-C cable

IMPORTANT: Please make sure that the phones, tablets, and computers' USB-C ports support at least the USB 3.1 GEN1 data transfer protocol and DP1.2.

Connection Steps:

Connect the full-featured USB-C to USB-C cable to the pen display's port ① and the computer or Android device.
Then, connect the power cable to the other port on the pen display ② and the power adapter for the power supply.

Connect via the USB-C to USB-C Cable

Make sure that your computer's USB-C port can handle a display connection; otherwise, your tablet will show "No signal."

Computers running Windows, macOS, and Linux (Ubuntu) are supported, as are Android tablets and phones. (Please note that not all Android phones support full-screen mode.)

For more information about phone connections, please refer to this article: How do I connect the Huion Kamvas Pro 19 to my phone?

For any further questions, please feel free to submit a ticket to us.