How do I connect the Huion Kamvas Pro 27 to my computer?

Wondering how to connect the Huion Kamvas Pro 27 to your computer? You can find the solution here.

Various ports to meet various needs

Unlike the Kamvas series pen display, the Kamvas Pro 27 is equipped with various ports. You can connect them for different uses.

• Power Port: Power your pen display by connecting the power cable.
• HDMI/DP Port: This port transmits the video signal from the computer to your pen display by connecting an HDMI/DP cable.
• USB-C Port: There are two ways to use it
  1. Use with HDMI/DP cable and power cable: Only transmits data from the computer to the pen display by connecting a USB cable.
  2. Use with power cable: Connect your pen display to a computer or Android phone via a full-featured USB-C to USB-C cable and a power cable for extra power supply.
• USB-A Port: Connect to external equipment such as keyboard, USB flash drive, etc.
• 3.5mm Headphone Jack: Connect to your headphones.

Huion Kamvas Pro 27 Ports

Connect via the HDMI/DP Cable and USB Cable

If your computer does not have a USB-C port, you can connect it using the included HDMI cable, USB Cable, and Power Cable.

HDMI cable and USB cable of Huion Kamvas Pro 27

Connection Steps:

1. Connect both ends of the HDMI/DP cable to the HDMI/DP ports of the pen display and computer.
2. Connect the USB-A ends of the cable to your computer and the USB-C ends to the pen display's port.
3. Connect the power adapter to the power cable and your pen display, then plug the power cable into a wall outlet to start your work.

Connect via the HDMI/DP Cable, USB Cable, and Power Cable

If you have a dedicated graphics card on your computer, please make sure to plug the HDMI/DP cable into the HDMI/DP port on the dedicated graphics card instead of that on the PC's motherboard.

Please note that the DP cable is not included in the package.

Connect via the USB-C to USB-C Cable (DP Mode)

If your computer/laptop/phone has a USB-C port, you can use the USB-C to USB-C cable connection.

USB-C to USB-C cable

Connection Steps:

1. Connect the full-featured USB-C to USB-C cable to the pen display's port and the computer or Android device.
2. Connect the power adapter to the power cable and your pen display, then plug the power cable into a wall outlet to start your work.

Connect via the USB-C to USB-C Cable

For more information about phone connections, please refer to this article:

How do I connect the Huion Kamvas Pro 27 to my phone?

For any further questions, please feel free to submit a ticket to us.