There are two methods to connect your Huion Mini Keydial KD100 to your computer. Simply plug in the USB cable into your Mini Keydial and your computer or connect wirelessly via the included wireless receiver.
Wired Connection
- Plug in the USB cable into your Mini Keydial and computer
- Download and install the driver.
- Open the driver, the picture of the Mini Keydial will be displayed on the interface, indicating that the device is successfully connected to the computer. You can start to setup and use the device.
Please note that you do not need to download the driver anymore if you are using Huion tablet or display and have installed the Huion V15 driver. For more info about driver, please refer to this article.
Wireless Connection
- Insert the included wireless receiver to your computer.
- Switch the power button on to power on the Mini Keydial.
- Download and install the driver.
- Open the driver, the picture of the Mini Keydial will be displayed on the interface, indicating that the device is successfully connected to the computer. You can start to setup and use the device.
Not using 15 mins, the Mini Keydial will enter sleep mode. In this case, you need to switch the power button on again to wake the device up.