How to Install Huion Drivers on Windows

If you have no idea how to install your Huion drivers on Windows properly, this article gives you step-by-step instructions to help guide you through the installation process.

TABLE OF CONTENTS

Part 1. Precautions before driver installation

1) If a graphic tablet driver has been installed on your Windows computer, please uninstall it before installing the new one. Otherwise, conflicts will occur. (Please check Three Methods to Uninstall Huion Drivers in Windows 7 and How to Install/Uninstall Huion V14 Driver on Windows (Video) articles to uninstall the Huion driver properly)

2) After uninstalling the driver, please restart your computer.

3) Please turn off the anti-virus and close all drawing programs on your computer before installing the new driver. Otherwise, you will be unsuccessful in installing the new driver.

4) Do not connect your graphic input device to the computer before the driver is installed. Otherwise, you may encounter a delay or error issue in system identification when installing the driver.

5) It is strongly recommended not to change the default path when installing the driver and just click Install to continue.

6) Extract the driver installation program or unzip the file before running it. Next, Right-click the program, then click "Run as administrator" to install it with administrator rights.

 

Part 2. Guidelines to install Huion driver V15, V14, V13, and V12 

Steps for installing the V15 driver

  1. Download the latest version of your tablet driver from this link: https://huion.com/download/ and extract or unzip the file. If you have issues with the latest version, download the 2nd latest one and so on. 
  2. Double-click on the unzipped tablet driver and click “OK” to proceed. You can also right-click on it and click "Run as administrator."
  3. Click the checkbox to agree with the User Agreement and click “Install now”
  4. After the installation has been completed, click on “Try it now”
  5. This will bring you to the driver panel that shows the device is disconnected.
  6. Connect your tablet to your computer and wait for the driver to detect your tablet. Then, proceed in customizing your tablet’s press keys (if applicable), pen buttons, and work area. You can refer to these articles on how to do so: How to Customize Press Keys and Digital Pen Button Functions for Specific Software and How to Set Your Tablet Display Work Area
  7. You can then open your drawing or writing program that you have downloaded and installed from the internet.

Steps for installing the V14 driver

  1. Visit Huion’s official website (www.huion.com/download) and download the necessary driver.
    To ensure that you access the corresponding driver, please type the complete name of your model. For example, the full name of your graphic tablet is WH1409 V2, you should type WH1409 V2, instead of WH1409.
  2. Unzip or extract the file downloaded from our official website. Then, double-click the unzipped or extracted exe file to launch the program.
  3.  Make sure you have closed all painting programs and turned off your antivirus before installing the driver, then click Yes for the next step.
  4.  Click Install to continue.
  5.  Click the "Completing the Setup Wizard" button.
  6.  Connect your graphic input device to the computer and the gray icon at the bottom-right corner of the desktop will turn to blue as you connect your device. Device connected will also be indicated on the driver interface, which means the driver has been successfully installed and has detected your tablet.

  7.  You can then open your drawing or writing program that you have downloaded and installed from the internet.

Steps for installing the V13 driver

  1. Visit Huion’s official website (www.huion.com/download) and download the driver you need.
  2. Unzip or extract the file downloaded from our official website. Then, double-click the unzipped or extracted exe file to launch the program.


  3. Make sure you have closed all painting software and turned off your antivirus before installing the driver and click Yes for the next step.
  4. Click the Next button when the following three prompts pop up.




  5. Click the Install button to start installing the driver.


  6.  Click the Finish button to complete the installation.
  7. Connect your graphic tablet or pen display to your computer via USB /VGA/HDMI/three-in-one cables. The gray icon at the bottom right corner of the desktop will then turn to blue and the Device connected will also be shown on the driver interface.


  8. You can then open your drawing or writing program that you have downloaded and installed from the internet.

Steps for installing the V12 driver

  1. Visit Huion’s official website(www.huion.com/download) and download the driver you need.
  2.  Unzip or extract the file downloaded from our official website. Then, double-click the unzipped or extracted exe file to launch the program.
  3.  Make sure you have closed all painting software and turned off your antivirus before installing the driver and click Yes for the next step.
  4. Click the Next button when the following four prompts pop up.







  5. Click the Install button to start installing the driver.



  6. Click the Finish button to complete the installation.
  7. Connect the graphic tablet to your computer via a USB cable and the icon at the bottom right corner of the computer will be replaced by the icon without the red "X".  Also, it will show "Device connected" on the driver interface as shown in the picture below:
  8. You can then open your drawing or writing program that you have downloaded and installed from the internet.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.