How to Manually Set Your Tablet to Phone Mode

When you connect your tablet to your phone, it will typically switch to phone mode automatically. However, in case it doesn't, you can follow these steps to set your tablet to phone mode manually:

Make sure your phone has the following system requirements:
- Your phone runs on Android 6.0 or later
- Your phone has an OTG function or feature
Turn on your phone's OTG function by going to Settings > Other settings > Find the OTG connection. We recommend contacting your phone manufacturer to determine whether your phone has this function or if you need help enabling it.
Connect your tablet to the OTG adapter and then to your phone.
Press the following tablet buttons for 3-5 seconds to enter phone mode:
- HS64, HS64 Chips, and H430P - press button 1
- H580X, H610X - press buttons 1 and 4
- RTE-100 - press button 4
- RTS-300, RTM-500, and RTP-700 - press buttons 1 and 4
- H640P, H950P, H1060P, H610Pro V2, HS610 - press buttons 1 and 5
- H1161 - press buttons 1 and 6
- H320M - press buttons 1 and 6
- HS611 - press buttons 8 and 10
- Inspiroy Giano G930L - press buttons 1 & 4
- Inspiroy Dial 2 Q630M - press buttons 1 & 4
For KD200, after you've connected the tablet to your phone, either using the OTG adapter or through Bluetooth, please press "Ctrl"+"Shift"+"Start/Command" on your tablet's programmable buttons for 3 seconds.

If your tablet doesn't enter the phone mode after trying the steps above, please update your phone's firmware.

NOTE: When you connect your tablet to a computer, it will automatically exit phone mode, and you can use the entire work area on your tablet. If it won't, please follow the steps in this article: How to Switch Your Pen Tablet from Phone Mode to Computer Mode.

Don't hesitate to contact [email protected] if you need further assistance, and provide the following:

Phone model
Phone's Android version
Your tablet's serial number, which is found on the back (S/N)
Pictures or link to a video of your issue, including error messages encountered