TABLE OF CONTENTS
Product Feature
What are the differences between the Kamvas Slate 11 and Kamvas Slate 13?
Screen Size (diagonal) | 10.95-inch | 12.7-inch |
Resolution | 1920 X 1200 | 2176 x 1600 |
Pixel Density | 207 PPI | 213 PPI |
Screen Ratio | 16:10 | 4:3 |
Refresh Rate | 90Hz | 60Hz |
ROM | 128GB Built-in storage Expandable up to 1TB | 256GB Built-in storage Expandable up to 1TB |
Does the Kamvas Slate 11/13 support SIM Cards?
Getting Started
1. Download and install the latest version of Spacedesk on PC.
2. Connect the tablet to the PC via USB cable, start Spacedesk respectively on the tablet and PC, and follow the prompts (after the first-time successful connection, when the tablet and PC are connected again, it will prompt whether to enter the Spacedesk working mode).
Note:
1. Currently, Spacedesk only supports the Windows PC version and does not support the Mac version.
2. If the tablet is connected to a PC and needs to start OTG or charge the device, you need to forcibly disable the Spacedesk process service in the PC task list (background start by default).
3. In Step 2, when the tablet pops up the window "Open Spacedesk when this USB accessory is connected", it is recommended to deselect "Use by default for this USB accessory" and directly click OK.
4. If the PC screen is not projected to the tablet after connection, please open the Spacedesk on the PC and check the switch and checkbox under the "Control" and "USB Cable Driver Android (ON)" are enabled.
You can customize the press key functions only in HiPaint or ibisPaint.
The specific steps are as follows:
For HiPaint:
1. Create a canvas.
2. Click the "⋮" icon in the upper right corner and select "Sketch Setting" under the "Setting" menu.
3. In "Stylus," set the "Stylus pen down button" to the function you want.
For ibisPaint:
1. Click the "gear" icon in the upper right corner to open the Setting menu
2. Scroll down to the "Pressure Sensitive Stylus" section
3. Ensure the option under "Supported Styluses" is set to "Available: Digital Stylus."
4. Set "Button 1" to the function you want.
1. Use the palm rejection glove included in the package to minimize accidental touches physically.
2. Enable the anti-accidental touch setting in the drawing software (refer to the operation guide in each software for more details).